Best Way of Installing Security Screws

Guidelines On Ways To Fix Security Screws On Your Wall

Installing screws in your concrete wall needs special tools along with a little bit of information about carpentry or masonry.  Moreover, if you possess right tools and correct information on how to apply Security Screws to your wall, you can easily do them on your own. It would certainly make your plain wall to hold attachments just like having cabinets installed or even a space where picture frames and paintings may be hung.  If you have these cabinets put into your room, it will provide extra storage area for your home. Paintings and pictures hung against your wall can accentuate the lovely features of your area, as well.


Start using these cement or Security Screws to your benefit. Attach furring strips to your cement walls. After that, you can do such things as adding up a drywall to beautifully finish your basement.

Below are some easy guidelines on how to set screws into your concrete walls:

1. You must choose the right fastener for this task. Assess the weight of the object that you want to place. Also, make sure that your screws are long enough to be able to hold in place after they were screwed into the concrete wall. For more information, rely on the packaging inlet to have the correct fastener to be used for the job.

2. Always wear safety gear. This usually includes goggles for eye protection, rubber tipped headsets and a dust mask. This is primarily important to be able to minimize the danger of having issues when doing jobs involving hand drills.

3. Place a mark at exactly where you need the holes to be drilled for those Security Screws at the wall. You can either use a pencil or permanent marker to make an “X” tag to where you have to drill.

4. Insert the masonry carbide-tipped drill into place. The carbide tip can hold up the bulk of the cement and it is much dependable than employing a regular drill. You can now proceed on drilling the actual spot where you left the mark from the earlier procedure.

5. You should create a pilot opening using the hammer drill. This type of drill doesn't burn out the motor easily, especially on hard walls like cement-made ones. This will certainly be a much easier job to perform rather than having a regular drill.

6. After that, drill a hole to the size of the packaging fastener that you certainly will use. Be sure you whack out any excess dust just before installing the screws.

7. Before  setting up the Security Screws in place, tap the anchor gently and make sure that the hole  from both the anchor and from the wall are aligned. You might need to use the hammer to touch the anchor gently into placed before inserting the screw. When the screws are mounted into place, make sure that you don't over-tighten the screws; or else, it will trigger the cement wall to bust.

8. Another tip is to put a secure distance between the screws to reduce the risk of having the cement wall to crack and split.

Stick to these basic DIY guides and you will probably not go wrong.